Annual variation of atmospheric carbonyl sulfide in the marine atmosphere in the Southern Indian Ocean

Measurements of the concentrations of carbonyl sulfide (COS) in the marine atmosphere were made over a period of two years in the southern Indian Ocean (Amsterdam Island, 37°50 S–77°31 E; March 1987–February 1988 and April 1989–February 1990). The mean atmospheric COS concentration for the whole period was 475±48 pptv (n=544). Atmospheric COS concentrations show no significant seasonal variation with a summer to winter ratio of 1.05. Taking into account the observed variability of the atmospheric COS concentration (10%), a value of 1.4 yr is estimated as a lower limit for the atmospheric COS lifetime. A comparison of the COS data at Amsterdam Island with those obtained in the Southern Hemisphere in the past 12 yr does not reveal any significant trend in the tropospheric background COS mixing ratio.     

Fluid and source magma evolution of the Questa porphyry Mo deposit,New Mexico,USA

Combined fluid inclusion microthermometry and microanalysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) are used to constrain the hydrothermal processes forming a typical Climax-type porphyry Mo deposit. Molybdenum mineralisation at Questa occurred in two superimposed hydrothermal stages, a magmatic-hydrothermal breccia and later stockwork veining. In both stages, texturally earliest fluids were single-phase, of low salinity (~7 wt.% NaCl_equiv.) and intermediate-density. Upon decompression to ~300 bar, they boiled off a vapour phase, leaving behind a residual brine (up to 45 wt.% NaCl_equiv) at temperatures of ~420°C. The highest average Mo concentrations in this hot brine were ~500 μg/g, exceeding the Mo content of the intermediate-density input fluid by about an order of magnitude and reflecting pre-concentration of Mo by fluid phase separation prior to MoS₂ deposition from the brine. Molybdenum concentrations in brine inclusions, then, decrease down to 5 μg/g, recording Mo precipitation in response to cooling of the saline liquid to ~360°C. Molybdenite precipitation from a dense, residual and probably sulphide-depleted brine is proposed to explain the tabular shape of the ore body and the absence of Cu-Fe sulphides in contrast to the more common Cu-Mo deposits related to porphyry stocks. Cesium and Rb concentrations in the single-phase fluids of the breccia range from 2 to 8 and from 40 to 65 μg/g, respectively. In the stockwork veins, Cs and Rb concentrations are significantly higher (45–90 and 110–230 μg/g, respectively). Because Cs and Rb are incompatible and hydrothermally non-reactive elements, the systematic increase in their concentration requires two distinct pulses of fluid exsolution from a progressively more fractionated magma. By contrast, major element and ore metal concentrations of these two fluid pulses remain essentially constant. Mass balance calculations using fluid chemical data from LA-ICPMS suggest that at least 25 km³ of melt and 7 Gt of deep input fluid were necessary to provide the amount of Mo contained in the stockwork vein stage alone. While the absolute amounts of fluid and melt are uncertain, the well-constrained element ratios in the fluids together with empirical fluid/melt partition coefficients derived from the inclusion analyses suggest a high water content of the source melt of ~10%. In line with other circumstantial evidence, these results suggest that initial fluid exsolution may have occurred at a confining pressure exceeding 5 kbar. The source of the molybdenum-mineralising fluids probably was a particularly large magma chamber that crystallised and fractionated in the lower crust or at mid-crustal level, well below the shallow intrusions immediately underlying Questa and other porphyry molybdenum deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Age and depositional environment of the Draa Sfar massive sulfide deposit, Morocco

The Draa Sfar mineralization consists of two main stratabound orebodies, Sidi M’Barek and Tazacourt, located north and south of the Tensift River (“Oued Tessift”), respectively. Each orebody is comprised by at least two massive sulfide lenses. The hosting rocks are predominantly black shales, although minor rhyolitic rocks are also present in the footwall to the southern orebody. Shales, rhyolitic volcanic rocks, and massive sulfides are all included into the Sarhlef Series, which is recognized as one of the main stratigraphic units of the Moroccan Variscan Meseta. Hydrothermal activity related with an anomalous thermal gradient, together with a high sedimentation rate in a tectonically driven pull-apart marine basin, favored the accumulation of organic-rich mud in the deepest parts of the basin and the sedimentary environment suitable for massive sulfide deposition and preservation. This took place by replacement of the hosting unlithified wet mud below the sediment–water interface. Geochemical data suggest a sedimentary environment characterized by oxic water column and anoxic sediment pile with the redox boundary below the sediment–water interface. The low oxygen availability within the sediment pile inhibited oxidation and pyritization of pyrrhotite. Biostratigraphic analysis, based on the palynological content of the hosting black shales, restricts the age of the sulfides to the Asbian substage (mid-Mississippian). This age is consistent with earlier geochronological constraints.     

Mineralogy and composition of Kuroko deposits from northeastern Honshu and their possible modern analogues from the Izu-Ogasawara (Bonin) Arc south of Japan: Implications for mode of formation

The Kuroko deposits of NE Honshu are a key type deposit for the study of volcanogenic massive sulfide deposits. However, these deposits have not been studied in detail since the early 1980's and knowledge of their mode of formation is now dated. In this study, we present the analysis of 12 samples of the Kuroko deposits, 12 samples of submarine hydrothermal minerals from the Sunrise deposit and 6 samples from Suiyo Seamount, both of which are located on the Izu-Ogasawara (Bonin) Arc, for 27 elements. For the Kuroko deposit, Cd>Sb>Ag>Pb>Hg>As>Zn>Cu are highly enriched, Au>Te>Bi>Ba>Mo are moderately enriched, In>Tl are somewhat enriched and Fe is not significantly enriched relative to the average continental crust. Within each of these deposits, a similar pattern of element associations is apparent: Zn–Pb with As, Sb, Cd, Ag, Hg, Tl and Au; Fe–Cu–Ba with As, Sb, Ag, Tl, Mo, Te and Au; Si–Ba with Ag and Au; CaSO₄. The enrichment of the chalcophilic elements in these deposits is consistent with hydrothermal leaching of these elements from the host rocks which are dominantly rhyolite–dacite in the case of the Kuroko deposits, rhyolite in the case of the Sunrise deposit and dacite–rhyolite in the case of the Suiyo Seamount deposit. However, this pattern of element enrichment is also similar to that observed in fumarolic gas condensates from andesitic volcanoes. This suggests that there may be a significant magmatic contribution to the composition of the hydrothermal fluids responsible for the formation of the Kuroko deposits, although it is not yet possible to quantify the relative contributions of these two sources of elements.The compositional data show that Sunrise and Suiyo Seamount deposits are much closer compositionally to the Kuroko deposits from NE Honshu than are the submarine hydrothermal deposits from the JADE site in the Okinawa Trough which contain, on average, significantly higher concentrations of Pb, Zn, Sb, As and Ag than each of these deposits. In spite of the greater similarity in tectonic setting of the Hokuroku Basin in which the Kuroko deposits formed to the Okinawa Trough (intracontinental rifted back-arc basin) compared to Myojin Knoll and Suiyo Seamount (active arc volcanoes), it appears that submarine hydrothermal deposits from Myojin Knoll and Suiyo Seamount are closer analogues of the Kuroko deposit than are those from the Okinawa Trough. The present data are consistent with the magmatic hydrothermal model for the formation of Kuroko-type deposits as formulated by Urabe and Marumo [Urabe, T., Marumo, K., 1991. A new model for Kuroko-type deposits of Japan. Episodes 14, 246–251].     

能量色散X射线荧光光谱法测定钼矿石中钼铅铁铜

建立了能量色散X射线荧光光谱法测定钼矿石中钼、铅、铁、铜的方法,讨论了粒度效应、矿物效应的影响因素,确定了采取粉末样品,用系列标准样品建立工作曲线,通过元素间相互校正消除基体效应,用内控标准样品考察了方法的精密度(RSD,n=11)为0.44%～15.4%。实际样品的测定结果和化学法相符,可满足日常分析工作需要。     

青海南部熔积岩的发现:对寻找VMS型矿床的重要启示

熔积岩指的是侵入、混合到未固结或弱固结的湿沉积物中的熔浆分解、原位形成的一类特殊岩石。正确地认识该类岩石,有利于增进人们对岩浆-水(沉积物)相互作用过程的理解,恢复古环境。在青海南部沱沱河地区发现了一套角砾为撕片状、锯齿状及浑圆状的安山岩,胶结物为铁硅质组合的特殊熔积岩。研究表明,该熔积岩的角砾为岩浆遇水后快速淬火、裂解的产物,铁硅质组合为海底喷气沉积形成的含铁建造;且安山岩与含铁建造发生混合时,含铁建造尚未固结。该套熔积岩的发现,改变了长期以来对开心岭铁矿为火山热液交代安山岩而形成的认识,对于在矿区寻找VMS型矿床、区域内寻找海底热水喷流沉积型矿床具有重要的启示意义。     

力马河镍矿Re-Os同位素研究

四川力马河镍矿是峨眉山大火成岩省一个重要的岩浆硫化物矿床。本文通过对其主要岩、矿石类型Re、Os及其同位素组成的分析,综合探讨了成矿岩体原始岩浆性质、矿石硫化物成因、成矿机制及Re-Os同位素等时线年龄。结果表明,力马河镍矿不同类型岩矿石样品初始Os同位素组成是不均一的,富硫化物的网脉状矿石及其选纯硫化物Os同位素组成初值差异较小,其等时线年龄为265±35 Ma、与岩体锆石SHRIMP年龄263±3 Ma基本相当;硫化物含量较低的岩、矿石样品间初始Os同位素组成差异较大,其表观等时线年龄大于成矿年龄。分析认为,岩矿样品初始Os同位素组成的不均一是由含较高放射成因187Os丰度的硫化物熔体和含较低放射成因187Os丰度的硅酸盐熔体不同比例混合造成的。混合模型分析表明,硫化物含量超过30％的矿石样品初始187Os/188Os基本接近,硫化物含量低于30％的岩矿石样品初始187Os/188Os随硫化物含量上的不同差异很大,为岩浆硫化物矿床Re-Os等时线年龄可能出现多组年龄解的现象提供了一种可能的解释。成矿岩体中含放射成因187Os丰度最低的岩石样品γOs（t=260Ma）在5左右、Cu/Pd比值在7000左右,表明是基本没有受到地壳混染及硫化物熔离影响的原始岩浆结晶分异产物,估计原始岩浆Os含量在1×10－9左右,为苦橄质岩浆。矿石硫化物Re/Os比值显著高于任何赋矿橄榄岩,γOs（t=260Ma）高达110左右,综合分析揭示了力马河镍矿硫化物为二次熔离成因,模式分析认为,矿石硫化物是由原始岩浆经历R=2000左右的硫化物熔离后、其亏损岩浆再经R=200左右的硫化物熔离形成,与二次熔离相对应,成矿岩浆也经历了两次混染作用,分别为上、下地壳7％左右的混染。     

河南省栾川县罗村钼矿成矿特征及找矿

通过对河南省栾川县罗村钼矿区域地质背景、矿床地质特征与南泥湖、三道庄及东沟超大型钼矿的综合对比、分析、研究,总结归纳了矿区NWW构造形迹、小岩体与钼矿成矿关系、围岩对成矿的控制作用、围岩蚀变与成矿的关系、地球化学异常与钼矿床的关系等成矿特征.根据罗村钼矿的成矿特征,初步指出今后的找矿方向.     

The concentration and distribution of dimethyl sulfide in the marine atmospheric boundary layer near the equator

Ｔｈｅｃｏｎｃｅｎｔｒａｔｉｏｎａｎｄｄｉｓｔｒｉｂｕｔｉｏｎｏｆｄｉｍｅｔｈｙｌｓｕｌｆｉｄｅｉｎｔｈｅｍａｒｉｎｅａｔｍｏｓｐｈｅｒｉｃｂｏｕｎｄａｒｙｌａｙｅｒｎｅａｒｔｈｅｅｑｕａｔｏｒ￥ＬｉＸｉｎｇｓｈｅｎｇ；ＬｉＺｈｅ；Ｆ．Ｐａｒｕｎｇｏ...     

大西洋中脊热液硫化物的矿物学研究

利用１９８９年在大西洋热液活动区采集的块状硫化物样品，采用矿相显微镜、电子显微镜和电子探针等手段，进行了矿物共生组合、矿物形态与成分标型及其演化特征研究。结果表明，大西洋热液成矿作用可以划分为热液期与沉积期两个成矿期，和石英－黄铁矿阶段、黄铁矿阶段、多金属硫化物阶段、胶状黄铁矿阶段和非晶质ＳｉＯ２阶段等５个成矿阶段；不同成矿阶段黄铁矿的共生矿物和矿物特征不同，在晶体形态上具有从单形晶－聚形晶－胶状